Water blaster service

Posted on November 14, 2011 by admin

To ensure your waterblaster has a long and happy life it is critical to get a few of the basics correct first and to spend 5 minutes reading this water blaster tips page. Karcher, Nilfisk, Alto, Bertollini, Pressure pro Water Blasters are all high quality units however they still require servicing and if you look after your water blaster you will get a long life with reliability and performance as a key factor.

Here are some tips from our Water Blaster Service Manager

Fresh water is critical to having a well performing machine and often we have clients coming in with the all too common problem of low water pressure. Here is the main reason we find that water blasters have problems with water pressure. Blocked filters. Always use a water filter on your machine to protect the water blaster from contaminated incoming water supply. It is very important to make sure the water source is good and contains no contaminants that will interfere with the water pressure and potentially cause pump damage.

There must not be a non-return (total stop) valve fitted to the garden hose to ensure pump damage is not an issue

Having a power extension lead that has no circuit breaker fitted or that lays on areas where it can be damaged can be dangerous and potentially cause damage to the machine and place human life at risk. The below conductor cross-sections are recommended for extensions:

1-10 meter a minimum conductor cross-section of 1.5mm2
10-30 meter a minimum conductor cross-section of 2.5mm2

Always ensure that the water supply to the water blaster is turned on, and the filter is clean and undamaged before switching on
Your garden hose (water supply hose) must be a minimum of 7.5 meters long and no longer than 30 meters to ensure the pump is not over worked
Ensure the high pressure hose and electrical cords are free and have no obstructions before every use
When you have finished using the water blaster, switch off the machine and turn off the power before turning the water off, then squeeze the trigger to release the pump pressure. This takes the pressure of the pump when the machine is not being used and will protect the seals and gaskets for the future.
Read the instruction manual carefully, and keep for future reference and warranty purposes

Service and Sales of water Blasters

Water Blaster Parts
At Complete Services Ltd we have a comprehensive range of Karcher Water Blaster Parts and parts for Alto, Bertolini and Nilfisk waterblasters. We can also service all brands of water blasters including Karcher Water Blaster. We carry in stock most parts including parts for Bertolini sprayers, high pressure hoses, wands, seals, gaskets and many other parts. If we don’t have the water blaster part then we have ahuge netword of suppliers to get the part quickly and to ensure you are not down for too long. As mentioned we service Alto Nilfisk as well plus the many other brands shown on our waterblaster service page.

Our 20 odd years of being in the water blaster business in Auckland means we know the machines and can give you expert help on servicing and maintaining your waterblaster plus tips on how to make them last longer.

As we are an approved karcher agent, Karcher Water Blaster Parts are usually in stock and readily available however if we do not have the part you require, rest assured that we can get it very quickly ensuring your downtime is limited.

We have parts for all the old models as well and second hands parts if required.

Please have the following handy when ordering Karcher parts.
1. Model number of your machine eg. K4.98 (normally on machine cover)
2. Part Number of machine eg. 1.345-345.0 (found on silver plate mostly on bottom of machine)
3. Result is faster more efficient service everytime.

Karcher water blaster parts

Posted on November 14, 2011 by admin

Ph 09 2743700
0800 4266753

At Complete Services we are specialists in karcher water blasters and Karcher waterblaster parts. 20 years of handling karcher water blaster parts means we have most parts in stock or close at hand for you. We also have karcher water blasters in stock plus a range of karcher scrubbers, cleaners and petrol waterblasters. Our range of karcher parts is very large and we have a great network for sourcing those hard to get karcher Water Blaster parts.

Commonly we get asked also for karcher waterblaster hoses and pressure hoses which can fail from time to time with wear and aging. Pressure heads and washers are also close at home. We also service Karcher Water Blasters and recommend you give you machine a regular service to ensure your machine is always reliable and ready to do the job. As many people rely on karcher water Blasters for their living, down time can cost money. We have karcher Water Blasters for hire and loan and we can get you back on the job very very quickly.

You can trust Complete Services with your water blaster no problems

Karcher Water Blasters

Nilfisk Water Blasters

Posted on November 12, 2011 by admin

At Complete Services we stock a full range of Nilfisk water blasters and we service and repair all Nilfisk Alto waterblasters. More often than not our customers are after Nilfisk waterblaster parts which we carry in stock or can get in very quickly. Our experienced team know these water blasters like the back of their hand.

We find the Nilfisk range of waterblasters to very reliable. With the quality and after sales service delivered by us at Complete Services, Nilfisk is a great choice for your next waterblaster. At Complete Services we have a competitively priced range of Nilfisk waterblasters and Alto Nilfisk parts for you. The range of Nilfisk parts and Nilfisk water blasters are too comprehensive to display on this waterblaster website so please contact one of our friendly staff to discuss how a Nilfisk waterblaster will suit your needs.
Complete Services is your first choice for alto nilfisk parts , service and new and used alto nilfisk waterblasters.

Water Blasters Auckland

Posted on November 6, 2011 by admin

At Complete Services we stock a full range of waterblasters, water blaster parts plus we service all makes and models of water blasters. Our staff have over 100 years combined experience and water blasters and cleaning equipment are in our blood.

Complete Services are a Karcher and Nilfisk/Alto dealer for Domestic and Commercial Cleaning Equipment, Water blasters, Steam cleaners, Vacuum cleaners, Sweepers and Scrubbers.

Complete Services has been in business since 1990 servicing cleaning equipment and waterblasters for Auckland and other regions with the same owner since 1993. Nigel Siburn and his team have a great knowledge on all types of waterblasters and can match you with the perfect machine to suit your needs.

We are sales and service agents for Karcher Water Blasters and Alto Nilfisk plus many other brands such as Castello, Lavor waterblasters, AES waterblasters, Bertollini, Pressurepro waterblasters and many many more.

Auckland Water Blasters

We are authorised agents for Karcher Water Blasters and Karcher Cleaning equipment such as Vacuum Cleaners, Sweepers, Residential and Commercial water Blasters, Water Blaster Accessories, Karcher Scrubbers.
Along with that we are specialists in Water Recycling and waste water capture.